Canon iR Advance C250i
Troubleshooting. Alarm Code 1
| Location Code |
Alarm Code |
Description | Details |
|---|---|---|---|
| 00 | 0085 | A notice of stat | - |
| 00 | 0246 | For R&D | - |
| 00 | 0247 | For R&D | - |
| 04 | 0001 | Cassette 1 Lifter error | Cause: Error in Lift Motor or Lifter Sensor Measures: 1. While Cassette 1 is removed, turn ON the power and then insert Cassette 1. When there is operation sound of the motor 1-1. Check the harness/connector between the DC Controller and the Cassette 1 Lifter Sensor 2-1. Check if the Cassette 1 Lifter Sensor is installed. 3-1. Extend the Sensor Flag of the Cassette 1 Lifter Sensor by approx. 1.5 mm with Plastic Film, etc. 4-1. Check the condition of the gear at the host machine side (to see if there is missing or swing with the gear) 5-1. Replace the Cassette 1 Lifter Sensor 6-1. Replace the DC Controller PCB When there is no operation sound of the motor 1-2. Check the harness/connector between the DC Controller and the Cassette 1 Lifter Motor 2-2. Check conduction of the fuse of the DC Controller 3-2. Check the condition of the gear at the host machine side (to see if there is something missing or swing with the gear) 4-2. Check the Cassette 1 Lifter Motor 5-2. Replace the DC Controller |
| 04 | 0002 | Cassette 2 Lifter error | Cause: Error in Lift Motor or Lifter Sensor Measures: 1. While Cassette 2 is removed, turn ON the power and then insert Cassette 2. When there is operation sound of the motor 1-1. Check the harness/connector between the DC Controller and the Cassette 2 Lifter Sensor 2-1. Check if the Cassette 2 Lifter Sensor is installed. 3-1. Extend the Sensor Flag of the Cassette 2 Lifter Sensor by approx. 1.5 mm with Plastic Film, etc. 4-1. Check the condition of the gear at the host machine side (to see if there is missing or swing with the gear) 5-1. Replace the Cassette 2 Lifter Sensor 6-1. Replace the DC Controller PCB When there is no operation sound of the motor 1-2. Check the harness/connector between the DC Controller and the Cassette 2 Lifter Motor 2-2. Check conduction of the fuse of the DC Controller 3-2. Check the condition of the gear at the host machine side (to see if there is something missing or swing with the gear) 4-2. Check the Cassette 2 Lifter Motor 5-2. Replace the DC Controller |
| 04 | 0003 | Cassette 3 Lifter error | Cause: Error in Lift Motor or Lifter Sensor Measures: 1. While Cassette 3 is removed, turn ON the power and then insert Cassette 3. When there is operation sound of the motor 1-1. Check the harness/connector between the DC Controller and the Cassette 3 Lifter Sensor 2-1. Check if the Cassette 3 Lifter Sensor is installed. 3-1. Extend the Sensor Flag of the Cassette 3 Lifter Sensor by approx. 1.5 mm with Plastic Film, etc. 4-1. Check the condition of the gear at the host machine side (to see if there is missing or swing with the gear) 5-1. Replace the Cassette 3 Lifter Sensor 6-1. Replace the DC Controller PCB When there is no operation sound of the motor 1-2. Check the harness/connector between the DC Controller and the Cassette 3 Lifter Motor 2-2. Check conduction of the fuse of the DC Controller 3-2. Check the condition of the gear at the host machine side (to see if there is something missing or swing with the gear) 4-2. Check the Cassette 3 Lifter Motor 5-2. Replace the DC Controller |
| 04 | 0004 | Cassette 4 Lifter error | Cause: Error in Lift Motor or Lifter Sensor Measures: 1. While Cassette 4 is removed, turn ON the power and then insert Cassette 4. When there is operation sound of the motor 1-1. Check the harness/connector between the DC Controller and the Cassette 4 Lifter Sensor 2-1. Check if the Cassette 4 Lifter Sensor is installed. 3-1. Extend the Sensor Flag of the Cassette 4 Lifter Sensor by approx. 1.5 mm with Plastic Film, etc. 4-1. Check the condition of the gear at the host machine side (to see if there is missing or swing with the gear) 5-1. Replace the Cassette 4 Lifter Sensor 6-1. Replace the DC Controller PCB When there is no operation sound of the motor 1-2. Check the harness/connector between the DC Controller and the Cassette 4 Lifter Motor 2-2. Check conduction of the fuse of the DC Controller 3-2. Check the condition of the gear at the host machine side (to see if there is something missing or swing with the gear) 4-2. Check the Cassette 4 Lifter Motor 5-2. Replace the DC Controller |