Canon iR Advance C250i
Troubleshooting. Jam Code. List 2
| ACCID | Jam Code | Type |
Sensor Name | Sensor ID | I/O | ||
|---|---|---|---|---|---|---|---|
| Address | bit | Remarks | |||||
| 00 | 0CC3 | Sequence | Software sequence error (Automatic adjustment: Last rotation-related) |
- | - | - | - |
| 00 | 0CC5 | Sequence | Software sequence error (Transfer-related) | - | - | - | - |
| 00 | 0CC6 | Sequence | Software sequence error (Prevention of ITB displacement) | - | - | - | - |
| 00 | 0CF1 | Sequence | Error avoidance jam | - | - | - | - |
| 00 | 0CF2 | Sequence | Software sequence error (Vsync error) | - | - | - | - |
| 00 | 0D91 | Size error | Wrong size (small) | - | - | - | - |
| 00 | 1CF1 | Error avoidance | Finisher error avoidance jam | - | - | - | - |
| 01 | 0001 | Delay | Document End Sensor | PS02 | P001 | 0 | 1:paper |
| 01 | 0002 | Stationary | Document End Sensor | PS02 | P001 | 0 | 1:paper |
| 01 | 0004 | Delay (at the time of reversing) |
Document End Sensor | PS02 | P001 | 0 | 1:paper |
| 01 | 0005 | Stationary (at the time of reversing) |
Document End Sensor | PS02 | P001 | 0 | 1:paper |
| 01 | 0021 | Timing | Document End Sensor | PS02 | P001 | 0 | 1:paper |
| 01 | 0071 | Timing Error | Timing Error Jam | - | - | - | - |
| 01 | 0094 | Power ON | Document End Sensor | PS02 | P001 | 0 | 1:paper |
| Document Sensor | PS03 | P001 | 1 | 1:paper | |||
| 01 | 0096 | Limited function mode | DF Job Error Jam | - | - | - | - |
| 02 | 1001 | Delay | Buffer Sensor | S1 | - | - | - |
| 02 | 1004 | Delay | Feed Path Sensor | S2 | - | - | - |
| 02 | 1104 | Stationary | Feed Path Sensor | S2 | - | - | - |
| 02 | 1301 | Power ON | Buffer Sensor | S1 | - | - | - |
| 02 | 1304 | Power ON | Feed Path Sensor | S2 | - | - | - |
| 02 | 1401 | Door Open | Buffer Sensor | S1 | - | - | - |
| 02 | 1404 | Door Open | Feed Path Sensor | S2 | - | - | - |
| 02 | 1500 | Stapler | Staple HP Sensor | S11 | - | - | - |
| 02 | 1F01 | Early arrival | Buffer Sensor | S1 | - | - | - |
| 02 | 2F30 | Error avoidance | Front Alignment Motor | - | - | - | - |
| 02 | 2F31 | Error avoidance | Staple Motor | - | - | - | - |
| 02 | 2F37 | Error avoidance | Rear Alignment Motor | - | - | - | - |
| 02 | 2F40 | Error avoidance | Stack Tray Shift Motor | - | - | - | - |
| 02 | 2F75 | Error avoidance | Gripper Motor | - | - | - | - |
| 02 | 2F77 | Error avoidance | Paddle Motor | - | - | - | - |
| 02 | 2F83 | Error avoidance | Tray Auxiliary Guide Motor | - | - | - | - |
*:Drum Unit detection may not be executed at times such as at recovery from sleep mode (of 4 or more hours). "No drum jam" is detected when a print job is executed with no Drum Unit installed in the machine.