Canon iR Advance C2230i
Troubleshooting. Alarm Code 2
| Location Code | Alarm Code | Description | Details |
|---|---|---|---|
| 30 | 0002 | Transfer Charging Assembly leak | |
| 0025 | Tried to apply abnormally great primary transfer voltage at primary transfer ATVC control for yellow. | Error in the Primary Transfer High Voltage PCB, Error in the Primary Transfer Roller (ITB Unit)
|
|
| 0026 | Tried to apply abnormally great primary transfer voltage at primary transfer ATVC control for magenta. | ||
| 0027 | Tried to apply abnormally great primary transfer voltage at primary transfer ATVC control for cyan. | ||
| 0028 | Tried to apply abnormally great primary transfer voltage at primary transfer ATVC control for black. | ||
| 31 | 0008 | HDD failure prediction alarm | Movement: HDD failure is expected to occur in a short time due to occurrence of physical error in HDD. It does not occur in the HDD of mirroring configuration. Cause: Error in the S.M.A.R.T. value of HDD Measures:
|
| 33 | 0006 | Drum Unit cooling fan alarm | |
| 0029 | Decurler Fan alarm | Movement: Nothing in particular (Fan stops). Cause: The harness of the Decurler Fan (FM1) is caught or disconnected. Measures: Check the connector connection -> Replace the Decurler Fan (FM1). |
|
| 34 | 0001 | Auto registration adjustment | Zero (0) was entered in the reading data of auto registration pattern -> Due to misalignment in reading data as a result of misdetection that soil or scar on the belt was detected as pattern |
| 0002 | Auto registration adjustment | When there is abnormal data in 8 or more sets among the 10 auto registration pattern sets -> Due to misalignment in reading data as a result of misdetection that soil or scar on the belt is detected as pattern | |
| 0006 | Correct color mismatch alarm | Color displacement is not properly corrected as a result of the drum phase control. Possibly an error in the Drum Phase Sensor |
|
| 35 | 0070 | Drum Unit (Y) replacement completion alarm |
|
| 0071 | Drum Unit (M) replacement completion alarm |
||
| 0072 | Drum Unit (C) replacement completion alarm |
||
| 0073 | Drum Unit (Bk) replacement completion alarm |
||
| 40 | 0070 | Drum Unit (Y) prior delivery alarm | An alarm for requesting a prior delivery is sent to UGW as the value of COPIER > COUNTER > LF > Y-DRM-LF has reached the value set in COPIER > OPTION > FNC-SW > D-DLV-CL. |
| 0071 | Drum Unit (M) prior delivery alarm | An alarm for requesting a prior delivery is sent to UGW as the value of COPIER > COUNTER > LF > M-DRM-LF has reached the value set in COPIER > OPTION > FNC-SW > D-DLV-CL. |
|
| 0072 | Drum Unit (C) prior delivery alarm | An alarm for requesting a prior delivery is sent to UGW as the value of COPIER > COUNTER > LF > C-DRM-LF has reached the value set in COPIER > OPTION > FNC-SW > D-DLV-CL. |
|
| 0073 | Drum Unit (Bk) prior delivery alarm |
An alarm for requesting a prior delivery is sent to UGW as the value of COPIER > COUNTER > LF > K-DRM-LF has reached the value set in COPIER > OPTION > FNC-SW > D-DLV-BK. |
|
| 50 | 0010 | Successive occurrence of separation alarm | Movement: Nothing in particular. Cause: Condition unable to separate 1st sheet of original from the ADF occurs 3 times. Measures: Check rotation of the Pickup Motor -> Check the life of the Pickup Roller -> Check if paper lint is at the Pickup Slot. |
| 0012 | ADF motor Fan alarm | Detect of Fan error |