| Alarm Code |
Title |
A. movement /B. cause /C. measures |
| 04-0003 |
Cassette 3 Lifter error |
Movement: The Cassette 3 Lifter Motor (M20) is stopped. Not using the Cassette 3.
Cause: The Cassette Lifter does not rise, failure of the Cassette
3 Paper Height Sensor (PS17).
Measures:
- Turn OFF and then ON the power. When it is recovered, the measure is completed. If it is not recovered, execute the following measures.
- Check if the Deck Lifter rises. If not, execute the following measures. If an alarm occurs although it rises, execute step 5 and later steps.
- Check the connection between the Cassette 3 Lifter Motor (M20) and the Feed Driver PCB (PCB3). Motor side: J2072, PCB side: J225
- Replace the Cassette 3.
- Check the connection between the Cassette 3 Paper Height Sensor (PS17) and the Feed Driver PCB (PCB3). Sensor side: J2080, J3635 (relay), PCB side: J223
- Check the operation of the Cassette 3 Paper Height Sensor (PS17), and replace it if necessary.
- Replace the Feed Driver PCB (PCB3).
|
| 04-0004 |
Cassette 4 Lifter error |
Movement: The Cassette 4 Lifter Motor (M21) is stopped. Not using the Cassette 4.
Cause: The Cassette 4 Lifter does not rise, failure of the Cassette 4 Paper Height Sensor (PS18).
Measures:
- Turn OFF and then ON the power. When it is recovered, the measure is completed. If it is not recovered, execute the following measures.
- Check if the Deck Lifter rises. If not, execute the following measures. If an alarm occurs although it rises, execute step 5 and later steps.
- Check the connection between the Cassette 4 Lifter Motor (M21) and the Feed Driver PCB (PCB3). Motor side: J2074, PCB side: J225
- Replace the Cassette 4.
- Check the connection between the Cassette 4 Paper Height Sensor (PS18) and the Feed Driver PCB (PCB3). Sensor side: J2091, J3636 (relay), PCB side: J224
- Check the operation of the Cassette 4 Paper Height Sensor (PS18), and replace it if necessary.
- Replace the Feed Driver PCB (PCB3).
|
| 04-0008 |
Option Deck Lifter error |
Movement: The Option Deck Pickup Motor (M) is stopped. Not using the Left Deck.
Cause: The Option Deck does not rise, failure of the Option
Deck Paper Height Sensor (PS).
Measures: Clear the error by turning OFF/ON the power. |
| 04-0010 |
Jam left untouched (RDS creates) |
- |
| 04-0031 |
Right Deck Lifter
Motor overcurrent alarm |
Movement: The Right Deck Lifter Motor (M4) is stopped. Not using the Right Deck.
Cause: The Right Deck is above the upper limit or is stopped along the way.
Measures:
- Check the connection between the Right Deck Lifter Motor (M4) and the Feed Driver PCB (PCB3). Motor side: J2069, PCB side: J225
- Replace the Right Deck Lifter Motor (M4).
- Check the Right Deck Upper Limit Sensor (PS8).
- Check the Right Deck Lifter Gear (damage, foreign matter, etc.).
- Replace the Feed Driver PCB (PCB3).
|
| 04-0032 |
Left Deck Lifter Motor overcurrent alarm |
Movement: The Left Deck Lifter Motor (M5) is stopped. Not using the Left Deck.
Cause: The Left Deck is above the upper limit or is stopped along the way.
Measures:
- Check the connection between the Left Deck Lifter Motor (M5) and the Feed Driver PCB (PCB3).Motor side: J2069, PCB side: J225
- Replace the Left Deck Lifter Motor (M5).
- Check the Left Deck Upper Limit Sensor (PS12).
- Check the Left Deck Lifter Gear (damage, foreign matter, etc.).
- Replace the Feed Driver PCB (PCB3).
|