Canon iR Advance 6255
Maintenance. Periodical Service 1
♦: Replacement (Periodical replacement) ●: Replacement (Consumable parts) Δ: Cleaning ×: Lubrication □: Adjustment ■: Inspection
N | Part Name | Part No | Interval | Counter | Remark | |||||||
120K | 250K | 500K | 600K | 1000K | 6000K | As needed | ||||||
1 | Primary Charging Assembly | FM3-7288 | ● | DRBL-1 | PRM-UNIT | |||||||
2 | Primary Charging Wire | FB4-3687 | ♦ | PRDC-1 | PRM-WIRE | With spring:FL3-4558 In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets |
||||||
3 | Primary Charging Wire cleaner | FL2-04620 | ♦ | PRDC-1 | PRM-CLN | In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets | ||||||
4 | Primary Charging Wire cleaner holder | FL2-2720 | ♦ | In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets | ||||||||
5 | Grid Wire | FY1-0883 | ♦ | PRDC-1 | PRM-GRID | |||||||
6 | Pre-transfer Charging Assembly | FM3-7297 | ● | DRBL-1 | PO-UNIT | |||||||
7 | Pre-transfer Charging Wire | FB4-3687 | ♦ | PRDC-1 | PO-WIRE | With spring:FL3-4559 In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets |
||||||
8 | Pre-transfer Charging Wire cleaner | FL2-0462 | ♦ | PRDC-1 | PO-CLN | In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets | ||||||
9 | Pre-transfer Charging Wire cleaner holder | FL2-2720 | ♦ | In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets | ||||||||
10 | Developing Cylinder | FM4-5438 | ● | DRBL-1 | DVG-CYL | |||||||
11 | Developing Roller | FB6-6569 | ● | - | - | |||||||
12 | Drum Cleaning Blade | FL3-5187 | ● | DRBL-1 | CLN-BLD | The blade movement is reversed at every 300 thousand sheets (1-sided). | ||||||
13 | Drum Separation Claw | FB4-8018 | ● | DRBL-1 | SP-CLAW | |||||||
14 | Drum Front Side Seal | FC8-7086 | ● | DRBL-1 | BS-SL-F | |||||||
15 | Drum Rear Side Seal | FC8-7086 | ● | DRBL-1 | BS-SL-R | |||||||
16 | Scraper | FC9-9153 | ● | Δ | DRBL-1 | EXP-SCRP | Clean with lint-free paper moistened with alcohol. | |||||
17 | Dustproof Glass | - | Δ | - | - | Clean with lint-free paper moistened with alcohol. | ||||||
18 | Primary Charging Assembly Shield Plate | - | Δ | - | - | Clean with lint-free paper moistened with water. | ||||||
19 | Pre-transfer Charging Assembly Shield Plate | - | Δ | - | - | Clean with lint-free paper moistened with water. | ||||||
20 | Drum Cleaning Unit Plate | - | Δ | - | - | Clean with lint-free paper moistened with alcohol. | ||||||
21 | Toner collection area | - | Δ | - | - | Crumb toner clusters. | ||||||
22 | Separation Claw Mounting Base | - | Δ | - | - | Clean with lint-free paper moistened with alcohol. | ||||||
23 | Process Unit Rear Guide | - | Δ | - | - | Clean with lint-free paper moistened with alcohol. | ||||||
24 | Drum Sliding Assembly | - | × | - | - | Apply lubricant at the Drum Sliding Assembly when abnormal sound is heard at the time of operation (FY9-6008). | ||||||
25 | Drum Surface | - | Δ | Using lint-free paper, clean the drum with the drum cleaning powder (FY9-6024). | ||||||||
26 | Drum Edge | - | Δ | Clean with lint-free paper moistened In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets |
||||||||
27 | The host machine surface below the Developing Assembly | - | Δ | - | - | Remove toner which was scattered at removal of Developing Assembly. | ||||||
28 | Developing wheel | - | Δ | - | - | Clean with lint-free paper moistened with alcohol. | ||||||
29 | Lower side of Cylinder. | - | Δ | - | - | Clean with lint-free paper moistened with alcohol. | ||||||
30 | Toner Receptacle Tray | - | Δ | - | - | Remove toner on the tray. | ||||||
31 | Waste Toner Container | - | Δ | - | - | Clean when the message is displayed. |