Canon iR Advance 4235
Troubleshooting. Jam Code. Finisher-G1, Puncher-B2
Staple Finisher-G1/Booklet Finisher-G1 + External Hole Puncher-B2
ACC ID | Jam Code | Type | Sensor ID | Sensor Name/Description |
---|---|---|---|---|
02 | 1001 | DELAY | PI103 | Inlet sensor |
02 | 1002 | DELAY | PCB12 | Photosensor PCB |
02 | 1004 | DELAY | PI104 | Feed path sensor |
02 | 1101 | STNRY | PI103 | Inlet sensor |
02 | 1102 | STNRY | PCB12 | Photosensor PCB |
02 | 1104 | STNRY | PI104 | Feed path sensor |
02 | 1200 | EARLY | PI103 | Inlet sensor |
02 | 1300 | POWER ON | PI104 | Feed path sensor |
02 | 1400 | DOOR OP | - | Door open jam |
02 | 1500 | STP | - | Staple jam |
02 | 1644 | PUNCH | PI63 | Punch jam |
02 | 1645 | POWER ON | PCB12 | Power on jam |
02 | 110F | ERROR | - | Error evasion jam |
02 | 1F86 | SDL STP | - | Saddle staple jam |
02 | 1F87 | POWER ON | PI1, PI17, PI18, PI19, PI20, PI22 | Power on jam |
02 | 1F88 | DOOR OP | - | Door open jam |
02 | 1F8F | ERROR*1 | - | Error evasion jam |
02 | 1F91 | DELAY | PI18 | No.1 paper sensor |
02 | 1F92 | DELAY | PI11 | Delivery sensor |
02 | 1F93 | DELAY | PI22 | Saddle inlet sensor |
02 | 1FA1 | STNRY | PI18,PI19,PI20 | No.1/2/3 paper sensor |
02 | 1FA2 | STNRY | PI11,PI17 | Delivery sensor/Vertical pat paper sensor |
02 | 1FA3 | STNRY | PI22 | Saddle inlet sensor |
*1: The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply. If the same jam is detected regardless of the operation above, the error code is displayed.