Canon MF8550Cdn
Service Mode. COPIER. ADJUST. CCD 1
COPIER > ADJUST > CCD | M82 | M85 | ||
---|---|---|---|---|
W-PLT-X | White level data(X) entry of white plate | |||
Details | To enter the white level data (X) for the Standard White Plate. When replacing the ADF/Reader Unit, enter the value of service label. When replacing the Reader Upper Cover Unit, enter the value of barcode label which is affixed on the glass. When replacing the Main Controller PCB, enter the value of service label. |
|||
Use case |
|
О | О | |
Adj/set/operate method | Enter the setting value, and then press OK key. | |||
Caution | After the setting value is changed, write the changed value in the service label. | |||
Display/adj/set range | 7000 to 9999 | |||
Default value | 8273 | |||
Related service mode | COPIER.> ADJUST> CCD> W-PLT-Y, W-PLT-Z | |||
W-PLT-Y | White level data(Y) entry of white plate | |||
Details | To enter the white level data (Y) for the Standard White Plate. When replacing the ADF/Reader Unit, enter the value of service label. When replacing the Reader Upper Cover Unit, enter the value of barcode label which is affixed on the glass. When replacing the Main Controller PCB, enter the value of service label. |
|||
Use case |
|
О | О | |
Adj/set/operate method | Enter the setting value, and then press OK key. | |||
Caution | After the setting value is changed, write the changed value in the service label. | |||
Display/adj/set range | 7000 to 9999 | |||
Default value | 8737 | |||
Related service mode | COPIER.> ADJUST> CCD> W-PLT-X, W-PLT-Z | |||
W-PLT-Z | White level data(Z) entry of white plate | |||
Details | To enter the white level data (Z) for the Standard White Plate. When replacing the ADF/Reader Unit, enter the value of service label. When replacing the Reader Upper Cover Unit, enter the value of barcode label which is affixed on the glass. When replacing the Main Controller PCB, enter the value of service label. |
|||
Use case |
|
О | О | |
Adj/set/operate method | Enter the setting value, and then press OK key. | |||
Caution | After the setting value is changed, write the changed value in the service label. | |||
Display/adj/set range | 7000 to 9999 | |||
Default value | 9427 | |||
Related service mode | COPIER.> ADJUST> CCD> W-PLT-X, W-PLT-Y | |||
DFTAR-R | Adjustment of shading target value (R) at ADF reading | |||
Details | To adjust the shading target value of Red at ADF reading. When replacing the Main Controller PCB, enter the value of service label. After executing COPIER> FUNCTION> CCD> DF- WLVL1, DF-WLVL2, write the value which is automatically set in the service label. |
|||
Use case |
|
О | О | |
Adj/set/operate method | Enter the setting value, and then press OK key. | |||
Display/adj/set range | 128 to 384 | |||
Default value | 299 | |||
Related service mode | COPIER> DISPLAY> CCD> TARGET-R COPIER> FUNCTION> CCD> DF-WLVL1, DF-WLVL2 |