Canon MF810Cdn
Service Mode. COPIER. DISPLAY. 5 HV-STS
COPIER> DISPLAY> HV-STS | ||
---|---|---|
2ATVC | Dspl secondary transfer ATVC tgt current | |
Details | To display the decuple value of the voltage flown to the Secondary Transfer Outer Roller derived from the secondary transfer ATVC control. If there is no problem in the result of the control, 3 values are displayed in ascending order. As the usage of the Secondary Transfer Outer Roller is extended, the value decreases. |
|
Use case | When identifying the cause at the occurrence of an image failure | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 0 to 65535 | |
Unit | 1 uA | |
Appropriate target value | 50 - 700 | |
Related service mode | COPIER> FUNCTION> CLEAR> 2TR-CLR | |
2ATVC2 | Dspl secondary transfer ATVC tgt current | |
Details | To display the decuple value of the voltage flown to the Secondary Transfer Outer Roller derived from the secondary transfer ATVC control. If there is no problem in the result of the control, 3 values are displayed in ascending order. As the usage of the Secondary Transfer Outer Roller is extended, the value decreases. |
|
Use case | When identifying the cause at the occurrence of an image failure | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 0 to 65535 | |
Unit | 1 uA | |
Appropriate target value | 50 - 700 | |
Related service mode | COPIER> FUNCTION> CLEAR> 2TR-CLR | |
2ATVC3 | Dspl secondary transfer ATVC tgt current | |
Details | To display the decuple value of the voltage flown to the Secondary Transfer Outer Roller derived from the secondary transfer ATVC control. If there is no problem in the result of the control, 3 values are displayed in ascending order. As the usage of the Secondary Transfer Outer Roller is extended, the value decreases. |
|
Use case | When identifying the cause at the occurrence of an image failure | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 0 to 65535 | |
Unit | 1 uA | |
Appropriate target value | 50 - 700 | |
Related service mode | COPIER> FUNCTION> CLEAR> 2TR-CLR | |
2ATVCENV | Dspl sec trns ATVC abslt moistr cntnt | |
Details | To display the absolute moisture content at execution of the secondary transfer ATVC. | |
Use case | At trouble analysis | |
Adj/set/operate method | N/A (Display only) | |
Display/adj/set range | 0 to 9999 | |
Unit | 0.01 g/m3 | |
Appropriate target value | 0 - 4000 |