Canon MF7450N
Service Mode. 05 SCAN
#SCAN | ||||
---|---|---|---|---|
No. | Initial setting | Range setting | Explanation | |
#SCAN SW | SW1 | 00000000 | Outputting an Image for ADF Squareness Adjsutment | |
SW2 - SW50 | Not used | |||
#SCAN NUMERIC | 001: - 023: | Not used | ||
024: | 385 | 300 to 450, one unit=0.1mm | CIS scan position during ADF scanning. | |
026: | 22 | 6 to 48, one unit=0.1mm | Distance from the standby position of CIS to the shading start point. | |
027: - 030: | Not used | |||
031: | 35 | 0 to 70, one unit=0.1mm | Vertical scan start position adjustment | |
032: | 115 | 50 to 150, one unit=0.1mm | Horizontal scan start position adjustment | |
033: | 16 | 0 to 32, one unit=0.1% | Vertical scan magnification correction | |
034: | Not used | |||
035: - 036: | 474 | Reader motor speed adjustment | ||
037: - 040: | Not used | |||
041: | 35 | 0 to 70, one unit=0.1mm | Vertical scan start position adjustment (scanning on ADF) | |
042: | 220 | 170 to 270, one unit=0.1mm | Horizontal scan start position adjustment (scanning on ADF) | |
043: | 24 | 0 to 200, one unit=0.1mm | Horizontal scan end position correction (copy) | |
044: | 36 | 0 to 200, one unit=0.1mm | Horizontal scan end position correction (superfine) | |
045: | 47 | 0 to 200, one unit=0.1mm | Horizontal scan end position correction (fine) | |
046: | 47 | 0 to 200, one unit=0.1mm | Horizontal scan end position correction (standard) | |
047: | 16 | 0 to 32, one unit=0.1% | Vertical scan magnification correction (scanning on ADF) | |
048: | 16 | 0 to 32, one unit=0.1% | Horizontal scan magnification correction (scanning on ADF) | |
049: - 053: | Not used | |||
054: | 16 | 0 to 32, one unit=0.1% | Pickup motor speed correction (when the ADF is used) | |
055: - 192: | Not used | |||
193: | 0 | 0: LEGAL 1: FOOLSCAP 2: M_OFFICIO 3: A_FOOLSCAP 4: FOLIO 5: G_LEGAL 6: A_OFFICIO 7: B_OFFICIO |
ADF special paper, standardized size: LGL misidentification-ready | |
194: | 0 | 0: LTR 1: G_LTR 2: A_LTR |
ADF special paper, standardized size: LTR misidentification-ready | |
195: | 0 | 0: LTR_R 1: FOOLSCAP 2: OFFICIO 3: E_OFFICIO 4: G_LTR_R 5: A_LTR_R |
ADF special paper, standardized size: LTR_R misidentification-ready | |
196: | 272 | 0 to 511 | shading target value (red) | |
197: | 272 | 0 to 511 | shading target value (green) | |
198: | 272 | 0 to 511 | shading target value (blue) | |
199: - 212: | Not used | |||
213: | 8273 | 1 to 9999 | XYZ correction value (X) of standard white plate | |
214: | 8737 | 1 to 9999 | XYZ correction value (Y) of standard white plate | |
215: | 9427 | 1 to 9999 | XYZ correction value (Z) of standard white plate |