Canon MF4554d
Service Mode. COPIER. ADJUST
ADJ-XY
COPIER>ADJUST>ADJ-XY | |||
---|---|---|---|
Sub item | Description | Common to all models | ADF model only |
ADJ-X | Adjustment value of image reading start position (Horizontal scanning direction) (X direction) [Applicable case] When the reading position of vertical scanning direction in fixed reading is incorrect [Adjustment]
|
Yes | |
STRD-POS | Adjusting reading position in DF stream reading [Applicable case] When the reading position of vertical scanning direction in DF stream reading is incorrect [Adjustment]
|
Yes | |
ADJ-X-MG | Fine adjustment (0.1% precision) of magnification ratio in Horizontal scanning direction in copyboard reading ±3% [Applicable case] When copy output image is larger or smaller than original image [Adjustment] Adjust by comparing the copy output and original. Increase the value when output image is smaller. Decrease the value when output image is larger. Setting range: - 30 ~ 30 [Factory default settings/ Value after RAM clear] 0 [Caution] This adjustment is targeted to adjust the image position on copy output. This may affect to the image of SCAN. |
Yes |
CCD
COPIER>ADJUST>CCD | |||
---|---|---|---|
Sub item | Description | Common to all models | ADF model only |
FBTAR-R | Shading target value for RED in copyboard reading Setting range: 128 ~ 384 [Value after RAM clear: 290] |
Yes | |
FBTAR-G | Shading target value for GREEN in copyboard reading Setting range: 128 ~ 384 [Value after RAM clear: 284] |
Yes | |
FBTAR-B | Shading target value for BLUE in copyboard reading Setting range: 128 ~ 384 [Value after RAM clear: 278] |
Yes | |
FBTAR-BW | Shading target value in copyboard black and white reading Setting range: 128 ~ 384 [Value after RAM clear: 301] |
Yes | |
DFTAR-R | Shading target value for RED in DF reading Setting range: 128 ~ 384 [Value after RAM clear: 334] |
Yes | |
DFTAR-G | Shading target value for GREEN in DF reading Setting range: 128 ~ 384 [Value after RAM clear: 323] |
Yes | |
DFTAR-B | Shading target value for BLUE in DF reading Setting range: 128 ~ 384 [Value after RAM clear: 318] |
Yes | |
DFTAR-BW | Shading target value in black and white reading Setting range: 128 ~ 384 [Value after RAM clear: 341] |
Yes |