Canon MF414dw
Service Mode. 1 Overview
Service Mode Menu
- COPIER
Service mode for copier- DISPLAY
State display mode - I/O
I/O display mode - ADJUST
Adjustment mode - FUNCTION
Operation / inspection mode - OPTION
Specification setting mode - COUNTER
Counter mode
- DISPLAY
- FEEDER
ADF service mode- ADJUST
Adjustment mode - FUNCTION
Operation / inspection mode
- ADJUST
- FAX
FAX service mode- SSSW
Bit switch registration mode - MENU
Menu switch registration mode - NUM
Numeric parameter setting mode - NCU
NCU parameter setting mode (Service adjustment is not available.
- SSSW
- TESTMODE
Service mode for test print, operation check, etc.- PRINT
Print Test Mode
- FAX
FAX test mode
- PRINT
Backing up Service Mode
Each device is tuned at the time of shipment and the tuned values are written on the service label. Because setting values and management data of the host machine are stored in the eMMC of the Main Controller PCB, they need to be backed up before replacing the Main Controller PCB.(Do not remove the eMMC PCB form Main Controller PCB.) Also, restoration of the backup data is necessary after replacing the Main Controller PCB.
- Backup: Connect a USB memory device to the USB memory port.
FUNCTION > SYSTEM > EXPORT - Restore: Restore backup data of the USB memory
FUNCTION > SYSTEM > IMPORT
Reference:
Saving Registered Data: Remote UI > Settings/Registration > Import/Export > Export
Loading Registered Data: Remote UI > Settings/Registration > Import/Export > Import