Canon MF232w
Service Mode. COPIER. OPTION
BODY
COPIER > OPTION > BODY | |||
---|---|---|---|
Sub item | Description | ADF model |
Other |
DFDST-L2 | DF dust detection level threshold value (detection after completion of job) Setting range: 0 to 255 (Default value: 100) | Yes | - |
LOCALE | To set country group. 1 : Japan 2 : North America 3 : Korea
|
Yes | Yes |
ASLPMAX | To change the maximum value of the auto sleep time. 0 : 30 minutes (Default value) 1 : 240 minutes |
Yes | Yes |
NS-CMD5 | Restriction of the use of CRAM-MD5 authentication method at SMTP authentica- tion 0: Dependent on the SMTP server (Default) 1: Not used |
Yes | Yes |
NS-PLN | Restriction of the use of PLAIN/LOGIN authentication, which is plaintext authen- tication, at SMTP authentication 0: Dependent on the SMTP server (Default) 1: Not used |
Yes | Yes |
NS-LGN | Restriction of the use of LOGIN authentication at SMTP authentication 0: Dependent on the SMTP server (Default) 1: Not used |
Yes | Yes |
SDTM-DSP | Setting of automatic shutdown menu display 0: Hide the menu 1: Display the menu |
Yes | Yes |
WLANPORT | Setting of whether to block transmission to/reception from an unnecessary port with port filter while Wi-Fi Direct is connected 0: Allow transmission to/reception from only the port used by Direct 1: Make the port status same as that of the port at wired side (not blocked) |
Yes | Yes |
SSLSTRNG | RC4 encryption 0: Normal mode (supported) 1: Secured mode (not supported) (Default) |
Yes | Yes |
ACC
COPIER > OPTION > ACC | ||
---|---|---|
Sub item | Description | Common to all models |
WLAN | Shows whether the Wireless LAN function is ON/OFF. 0: Forcibly turned OFF (The function is disabled even if the wireless LAN is installed.) 1: ON (Default value) |
Yes |
WLANMODE | Shows whether the Wireless LAN IEEE 802.11n standard is enabled/disabled. 0: Disabled 1: Enabled (Default value) |
Yes |
WLANSERIAL | Not in use | - |
SERIAL
COPIER > OPTION > SERIAL | ||
---|---|---|
Sub item | Description | Common to all models |
SN-MAIN | Enter the device serial number written on the rating name plate of the host machine.
|
Yes |
FNC-SW
COPIER > OPTION > FNC-SW | ||
---|---|---|
Sub item | Description | Common to all models |
CRG-PROC | To set the operation performed when a cartridge reaches the end of life. 0: Not stopped (Default) 1: Stopped once 2: Completely stopped |
Yes |
CRGLF-K | Reference value for judging "Out" of the component other than toner (Drum/Developing Assembly/waste toner) included in the cartridge life (for Bk) Setting range: 0 to 200 (Default value: 100) |
Yes |