Brother MFC9140CDN
Troubleshooting. 2.8.3 Paper jam at paper eject section
User Check
- Turn the orientation of the papers loaded in the paper tray by 180°.
- Check if the thickness of the paper is 60 to 105 g/m2. (60 to 163 g/m2 for manual feed slot.)
- Check if a label sticks to a roller or the paper transport section.
Step | Cause | Remedy |
---|---|---|
1 | Foreign object at the back of the machine | Remove foreign object. Check if a label sticks to the side or underside of a part. |
2 | Eject actuator catching on some position | Re-assemble the eject actuator. |
3 | Fuser cover installation failure | Re-assemble the fuser cover. |
4 | Back cover installation failure | Re-assemble the back cover. |
5 | Eject sensor PCB harness connection failure | Check the eject sensor PCB harness connection and reconnect it. |
6 | Back cover failure | Replace the back cover. |
7 | Eject roller 1 failure | Replace the fuser cover. |
8 | Eject sensor failure | Replace the eject sensor PCB ASSY. |
9 | Main PCB failure | Replace the main PCB ASSY. |