Brother MFC8950DW
Maintenance Mode 2. Functions List
Function code | Function |
---|---|
01 | Initialize EEPROM parameters |
05 | Print white level/black level data for document scanning compensation |
06 | Move CIS unit to transportation position |
08 | ADF performance test |
09 | Print test pattern |
10 | Set worker switches (WSW) |
11 | Print worker switch (WSW) setting data |
12 | Check LCD operation |
13 | Check control panel button operation |
25 | Display software version |
32 | Check sensor operation |
33 | Display LAN connection status |
43 | Set PC print functions |
45 | Change USB No. return value / Adjust left-end print start position on second side when duplex printing / Change ON/OFF setting for Deep Sleep function |
52 | Set country / language |
53 | Transfer received fax data/log information |
54 | Fine-tune scanning position |
55 | Acquire white level data and set CIS scan area |
61 | Adjust touch panel |
67 | Continuous print test |
69 | Print frame pattern (single-side printing) |
70 | Print frame pattern (duplex printing) |
71 | Print solid pattern |
74 | Setting by country |
77 | Print maintenance information |
78 | Check fan operation |
80 | Display machine log information |
82 | Display machine error code |
87 | Send communication log information to telephone line |
88 | Reset counters for periodic replacement parts |
91 | Initialize EEPROM parameters |
99 | Quit maintenance mode |
The maintenance mode functions shaded in the table can be used by end users.