Brother MFC1818
Troubleshooting. 2.4.2 Paper is jammed in the paper eject path
User Check
- Rotate the paper 180 degrees in the paper tray.
- Check that the thickness of the paper is within the standard.
- Check that there is no label stuck in the paper feed path.
Step | Cause | Remedy |
---|---|---|
1 | Top cover is not closed | Close the top cover. |
2 | Foreign object in the rear of the machine | Remove the foreign object. Check for labels stuck on the side or bottom of parts. |
3 | Eject actuator caught in sections of the machine | Reattach the eject actuator. |
4 | Connection failure of the eject sensor PCB harness | Reconnect the eject sensor PCB harness. |
5 | Eject sensor failure | Replace the eject sensor PCB ASSY. |
6 | Connection failure of the paper feed/paper printing position sensor PCB harness | Reconnect the paper feed/paper printing position sensor PCB harness. |
7 | Paper feed/paper printing position sensor PCB failure | Replace the paper feed/paper printing position sensor PCB ASSY. |
8 | Develop joint link failure | Replace the develop joint link. |
9 | Fuser unit failure | Replace the fuser unit. |
10 | Main PCB failure | Replace the main PCB ASSY. |