Brother MFC-L2700D
Troubleshooting. 2.8.2 Paper jams in the manual feed slot
User Check
• Check that the paper is set in the manual feed slot correctly.
• Flip over the paper in the manual feed slot or rotate the paper 180°.
• Adjust the paper guide according to the paper size.
• Check that multiple sheets of paper are not set.
• Check that the thickness of the paper is 60 to 163 g/m2.
Step | Cause | Remedy |
---|---|---|
1 | Foreign object around the manual feed slot | Remove the foreign object. |
2 | Connection failure of the registration front/rear sensor PCB harness | Reconnect the registration front/rear sensor PCB harness. |
3 | Registration front actuator coming off | Reattach the registration front actuator. |
4 | Connection failure of the registration clutch harness | Reconnect the registration clutch harness. |
5 | Connection failure of the HVPS flat cable | Reconnect the HVPS flat cable. |
6 | HVPS flat cable breakage | Replace the HVPS flat cable. |
7 | Registration front sensor failure | Replace the registration front/rear actuator holder ASSY. |
8 | Registration clutch failure | Replace the registration clutch. |
9 | Main motor failure | Replace the main motor. |
10 | High-voltage power supply PCB failure | Replace the high-voltage power supply PCB ASSY. |
11 | Damaged gears in the feeding system | Replace the main frame L ASSY. |
12 | Fuser unit failure | Replace the fuser unit. |
13 | Main PCB failure | Replace the main PCB ASSY. |