Brother HL3160CDW
Troubleshooting. 2.8.2 Paper jam at the manual feed slot
User Check
• Check that the paper is set in the manual feed slot correctly.
• Flip over the paper in the manual feed slot or rotate the paper 180°.
• Adjust the paper guide according to the paper size.
• Check that multiple sheets of paper are not set.
• Check that the thickness of the paper is 60 to 163 g/m2.
Step | Cause | Cause |
---|---|---|
1 | Foreign object around the manual feed slot | Remove the foreign object. |
2 | Registration front actuator coming off | Reattach the registration front actuator. |
3 | Connection failure of the registration clutch harness | Reconnect the registration clutch harness. |
4 | Damaged gears in the paper feed drive unit | Replace the paper feed drive unit. |
5 | Paper feed motor failure | Replace the process drive unit. |
6 | Damaged fuser unit | Replace the fuser unit. |
7 | Main PCB failure | Replace the main PCB. |