Brother HL2260D
Troubleshooting. 2.8.4 Paper jams in the ejecting section
User Check
• Check that the paper is set in each paper tray correctly.
• Flip over the paper in each paper tray or rotate the paper 180°.
• Adjust each paper guide according to the paper size.
• Check that there is not too much paper set in the paper tray.
• Check that the thickness of the paper is 60 to 105g/m2. (60 to 163g/m2 for manual feed slot)
• Flip through the paper and reset it in the paper tray.
Step | Cause | Remedy |
---|---|---|
1 | Foreign object in the back cover | Remove the foreign object. |
2 | Eject actuator coming off | Reattach the eject actuator. |
3 | Connection failure of the eject sensor PCB flat cable | Reconnect the eject sensor PCB flat cable. |
4 | Fuser cover attachment failure | Reattach the fuser cover. |
5 | Eject sensor failure | Replace the eject sensor PCB ASSY. |
6 | Damaged gears in the ejecting system | Replace the main frame L ASSY. |
7 | Fuser unit failure | Replace the fuser unit. |
8 | Main PCB failure | Replace the main PCB ASSY. |