Brother HL-L3270CDW
Troubleshooting. 2.8.1 Paper jam at the T1
User Check
• Check that the paper is set in the T1 correctly.
• Flip over the paper in the T1 or rotate the paper 180°.
• Adjust each paper guide according to the paper size.
• Check that there is not too much paper set.
• Check that the thickness of the paper is 60 to 163 g/m2 for T1.
• Flip through the paper and reset it in the T1.
Step | Cause | Cause |
---|---|---|
1 | Foreign object around the T1 | Remove the foreign object. |
2 | Paper dust cleaning roller attachment failure | Reattach the paper dust cleaning roller. |
3 | Paper feed actuator coming off | Reattach the paper feed actuator. |
4 | Registration front actuator coming off | Reattach the registration front actuator. |
5 | Connection failure of the manual feed paper empty/regist rear/ regist front sensor harness | Reconnect the manual feed paper empty/ regist rear/regist front sensor harness. |
6 | Connection failure of the registration clutch harness | Reconnect the registration clutch harness. |
7 | Connection failure of the T1 paper empty/paper feed sensor harness | Reconnect the T1 paper empty/paper feed sensor harness. |
8 | Damaged gears in the paper feed drive unit | Replace the paper feed drive unit. |
9 | Paper feed motor failure | Replace the process drive unit. |
10 | Paper feed unit failure | Replace the paper feed unit. |
11 | Damaged fuser unit | Replace the fuser unit. |
12 | Main PCB failure | Replace the main PCB. |