Brother HL-L3210CW
Troubleshooting. 2.3 Multiple sheets of paper are fed, Paper becomes wrinkled
2.3 Multiple sheets of paper are fed
User Check
• Check that there is not too much paper set in the T1.
• Check that the paper is set in the T1 correctly.
• Flip over the paper in the T1 or rotate the paper 180°.
• Check that the thickness of the paper is 60 to 163 g/m2.
• Flip through the paper and reset it in the T1.
Step | Cause | Cause |
---|---|---|
1 | Abrasion of the separation pad ASSY | Replace the PF kit 1. |
4.2.4 Paper becomes wrinkled
User Check
• Check that the paper is set in the T1 correctly.
• Flip over the paper in the T1 or rotate the paper 180°.
• Adjust each paper guide according to each paper size.
• Check that the thickness of the paper is 60 to 163 g/m2.
• Check that the paper is not damp.
• Check that there is no dust stuck to the heat roller or pressure roller of the fuser unit.
• Check that the type of paper is appropriate.
• Check that the right and left envelope levers of the fuser unit are not set in the different positions.
Step | Cause | Cause |
---|---|---|
1 | Paper eject ASSY failure | Replace the paper eject ASSY. |
2 | Fuser unit failure | Replace the fuser unit. |