Brother HL-L2320D
Troubleshooting. 2.6 Paper is curled, Duplex printing is not possible
2.6 Paper is curled
User Check
• Check that the paper specified in driver settings is matched to the paper set.
• Select "Reduce Paper Curl" in the driver.
• Check that the paper is set in each paper tray correctly.
• Print while the green envelope levers are lowered.
Step | Cause | Remedy |
---|---|---|
1 | Fuser unit failure | Replace the fuser unit. |
2 | Main PCB failure | Replace the main PCB ASSY. |
2.7 Duplex printing is not possible
User Check
• Close the back cover completely.
• Set the duplex tray correctly.
• Set the driver setting to duplex printing.
• Use A4 or Letter paper specified by the manufacturer.
Step | Cause | Remedy |
---|---|---|
1 | Eject actuator coming off | Reattach the eject actuator. |
2 | Back cover failure | Replace the back cover. |
3 | Back cover/duplex tray empty sensor or eject sensor failure | Replace the eject sensor PCB ASSY. |
4 | Duplex tray failure | Replace the duplex tray. |
5 | Main PCB failure | Replace the main PCB ASSY. |
6 | Damaged gears in the ejecting system | Replace the main frame L ASSY. |