Brother DCP-T300
Maintenance Mode 2. Functions List
Maintenance Mode | Function |
---|---|
01 | EEPROM Parameter Initialization |
02 | Creating of Head Calibration Data and Writing it into Flash ROM |
05 | Printout of Scanning Compensation White/Black Level Data |
08 | ADF Performance Test |
09 | Printout of Test Pattern |
10 | Worker Switch (WSW) Setting |
11 | Printout of Worker Switch (WSW) Data |
12 | Operational Check of LCD |
13 | Operational Check of Keys on Control Panel |
17 * | EEPROM Dump Transfer |
32 | Sensor Operational Check |
37 * | Printout of Dial Log. |
52 | Setting of Country/Language |
53 | Transfer of Received FAX Data and/or Equipment's Log |
54 | Fine Adjustment of Scanning Position |
55 | Acquisition of White/Black Level Data and CIS Scanner Area Setting |
57 | Cartridge IC Communication Check |
58 | Updating of Paper Feeding Correction Value |
59 | Checking of CIS Travel and Specifying of CIS Type |
63 | Move of the Head/carriage unit to the Adjustment Position |
65 | Adjustment of the Vertical Print Lines/Software Correction for Inclination/Corrugation/Ruled Lines |
66 | Margin Adjustment in Borderless Printing |
68 | Updating of Head Property Data |
69 | Traveling Speed Check of Head/carriage unit |
74 | Customize Code Destinations |
75 | Moving the Head/carriage unit to the Center |
76 | Purge Operation |
77 | Print of the Maintenance Information |
78 | Adjustment of Touch Panel |
80 | Display of the Equipment's Log |
82 | Equipment Error Code Indication |
87 | Output of Transmission Log to the Telephone Line |
88 | Assurance Mode Switch Setting (AMS) |
91 | EEPROM Parameter Initialization |
99 | Exit from the Maintenance Mode |
Shaded maintenance mode functions are available to end users.
* Exclusive to the end user-accessible maintenance mode.