Brother DCP-L5600DN
Maintenance Mode 2. Functions List
Function code | Function |
---|---|
01 | Initialize EEPROM parameters |
08 | ADF performance test |
09 | Print quality test pattern |
10 | Set worker switches (WSW) |
11 | Print worker switch (WSW) setting data |
12 | Check LCD operation |
13 | Check control panel key operation |
18 | Save NetConfig data |
25 | Display software version |
28 | Change setting for OnePushDemo function |
32 | Check sensor operation |
33 | Display LAN connection status |
43 | Set PC print functions |
45 | Change USB No. return value / Adjust left-end print position / Adjust upper-end print position / Set HEXDUMP Mode |
46 | Adjust printable range for each speed level (Full speed / Half speed for thick paper / Quiet Mode) |
52 | Set country / language |
53 | Transfer received fax data / log information (fax models only) |
54 | Fine-tune scanning position |
55 | Acquire white level data and set CIS scan area |
61 | Adjust touch panel |
67 | Continuous print test |
69 | Print frame pattern (single-side printing) |
70 | Print frame pattern (duplex printing) |
71 | Print test pattern |
74 | Configure for country/region and model |
77 | Print maintenance information |
78 | Check main fan operation |
79 | Delete fax data |
80 | Display machine log information |
82 | Display machine error code |
87 | Send communication log information to telephone line |
88 | Reset counters for consumable parts |
91 | Initialize EEPROM parameters |
99 | Quit maintenance mode |
* The maintenance mode functions shaded in the table can be used by end users.