Remedy: (1) Turn the power OFF and start up the Setting Mode (08). (2) Key in “662” and press the [START] button. (Partition clearing is performed.) (3) Restart the equipment. (4) Access TopAccess. Click the [Administration] tab, and then click the Maintenance Menu to open. Then install the “Point and Print” driver.
Code: F107
Description: SHR partition damage
Remedy: Initialize the Electronic Filing using the Setting Mode (08-666).
Code: F108
Description: SHA partition damage
Remedy: Initialize the shared folder using the Setting Mode (08-667).
Code: F110
Description: Communication error between System-CPU and Scanner-CPU
Remedy: (1) Check if the jumper pin setting on the SYS board is correct. (Check if a jumper pin is inserted between Pin 1 and Pin 2 of the CN 103 and the CN115.) (2) Check if the harness connecting the SYS board and SLG board is disconnected or open circuited. (3) Check the version of the system ROM on the SYS board. (4) Check the version of the scanner ROM version on the SLG board. (5) Replace the SYS board. (6) Replace the SLG board.
Code: F111
Description: Scanner response abnormality
Remedy: (1) Check if the jumper pin setting on the SYS board is correct. (Check if a jumper pin is inserted between Pin 1 and Pin 2 of the CN 103 and the CN115.) (2) Check if the harness connecting the SYS board and SLG board is disconnected or open circuited. (3) Check the version of the system ROM on the SYS board. (4) Check the version of the scanner ROM version on the SLG board. (5) Replace the SYS board. (6) Replace the SLG board.
Code: F120
Description: Database abnormality: Database is not operating normally.
Remedy: (1) Rebuild the databases. (Perform 08-684.) (2) If the error is not recovered, initialize the HDD. (Key in “2” at 08-690.)