Samsung SLM4583FX

• Code: C1–1120, C1–1140
• Display: Replace with new toner cartridge. End of life, Replace with new toner cartridge.
• Description: Toner cartridge is at the end of its life.
• Remedy: 1) Open the front cover. 2) Remove the toner cartridge. 3) Install the new toner cartridge. 4) Close the front cover.

• Code: C1–1160, C1–1170
• Display: Replace with new toner cartridge. End of life, Replace with new toner cartridge.
• Description: Toner cartridge is at the end of its life.
• Remedy: 1) Open the front cover. 2) Remove the toner cartridge. 3) Install the new toner cartridge. 4) Close the front cover.

• Code: C1–1311, C1–1313, C1–1314
• Display: Toner Cartridge Failure: #C1-1311. Install toner cartridge again. Shake toner cartridge and then install.
• Description: The toner supply is abnormal.
• Remedy: 1) Turn the machine off then on. 2) Open the front cover. 3) Remove the toner cartridge. Thoroughly roll the cartridge three or four times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge. 4) Try to print out the sample page more than 20 pages. 5) Check the toner cartridge. • Check if the toner cartridge is installed correctly. • Check if the toner seal is removed perfectly. • Check if the toner supply shutter between the toner cartridge and the imaging unit works normally. 6) Replace the toner cartridge. Print out the sample page. 7) Check the toner supply motor operation. • Check the signal and power with the DVM. • If the checked result is normal, replace the DC motor(JC31-00078A) or the main drive unit(JC93–00923A).

• Code: C1–1411
• Display: Toner cartridge is not installed. Install the cartridge.
• Description: The toner cartridge is not installed properly.
• Remedy: 1) Open the front cover. 2) If the toner cartridge is not installed, install it. Try to test the machine again. 3) If the toner cartridge is installed, remove it. Check if the modular jack is contaminated or broken. 4) Clean the modular jack or replace the toner cartridge. 5) If it is OK, check the CN22 harness connection on the main board. 6) If the harness is defective, replace it. 7) Turn the machine off then on. Try to test the machine.

• Code: C1–1512
• Display: Toner cartridge is not compatible. Check users guide.
• Description: Toner cartridge is not compatible.
• Remedy: 1) Open the front cover. Remove the toner cartridge. 2) Check if the label information of the toner cartridge is same with the machine’s one. (ex. /SEE) 3) If label information is different from the machine or the toner cartridge is not a samsung genuine, replace it with a new one.

• Code: C1–1712
• Display: Toner Cartridge Failure: #C1-1712. Call for service
• Description: The data of CRUM is not detected. / CRUM is defective.
• Remedy: 1) Open the front cover. Check if the toner cartridge is installed. 2) Remove and reinstall the toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the toner cartridge with new one.