Description: Your machine’s memory has become full while documents were being loaded into memory.
Remedy: To cancel the fax job, press the No 1 button Yes. If you want to send the pages already stored, press the No 2 button No. You should send the remaining pages later when the memory is available.
Code: 25
Display: Operation Not Assigned
Description: You are doing in the Add/Cancel operation, but there is no jobs waiting.
Remedy: Check the display to see if there is any scheduled job. The display should indicate them in standby mode, for example, Delay Fax.
Code: 26
Display: [Low Heat Error]
Description: Temperature could not reach certain level.
Remedy: Refer to the flow chart of the fuser problem.
Code: 27
Display: Open Heat Error
Description: The thermistor has been disconnected.
Remedy: Refer to the flow chart of the fuser problem.
Code: 28
Display: [Over Heat]
Description: Temperature has gone up very high degree.
Remedy: Refer to the flow chart of the fuser problem.