-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Samsung SF650
Error Codes List page 3
|
|
- Code: 12
- Display: Power Failure
- Description: Power has turned off then on and the machine’s memory has not been saved.
- Remedy: You need to start again the job which you were trying to do before the power failure.
- Code: 13
- Display: [Stop Pressed]
- Description: The Stop/Clear button is pressed during a copy or fax operation.
- Remedy: Try again.
- Code: 14
- Display: Memory Full
- Description: The memory is full.
- Remedy: Delete unnecessary documents, retransmit after more memory becomes available or split the transmission into more than one operation.
- Code: 15
- Display: CRU Fuse Error
- Description: When the machine failed in installing the new toner cartridge.
- Remedy: Open the front door and take out the toner cartridge. Then re-install it.
- Code: 16
- Display: [Hsync Error] Or [LSU Error]
- Description: When the machine has encountered the LSU could not reach the READY state.
- Remedy: Enter the EDC mode.(Refe to EDC mode). And check the LSU Control Test. If the LSU is defective, replace it.
- Code: 17
- Display: [Toner Low]
- Description: Small amount of toner is left in the cartridge. The estimated cartridge life of toner is close.
- Remedy: Prepare a new cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner.