Samsung ProXpress M4530NX
Error Codes List page 2
|
|
- Code: A1-5110
- Description: Motor Failure: #A1-5110. Turn off then on. Call for service if the problem persists
- Causes: Supply motor operation is abnormal.
- Remedy: 1) Turn the machine off then on. If the error persists, check the following.
2) Remove the right cover.
3) Check the connection between the Toner Supply(DC) motor and main board.
4) If the connection is OK, enter SVC mode. Execute the motor test. a) If the motor is not operational, i) Check the motor signal(3.3V). If the signal is abnormal, replace the main board(JC92–02802A(M4530ND) / JC92–02801A(M4530NX)). ii) Check the power(24V). If the power is abnormal, check the SMPS board. If the SMPS board(JC44-00092C (220V) / JC44-00091C (110V)) is defective, replace it. iii) If the motor signal and power is normal, replace the DC motor(JC31-00078A) or the main drive unit(JC93–00923A). b) If the motor is operational, replace the main board
- Code: A3-3212
- Description: Sensor Failure: #A3-3212. Turn off then on. Call for service if the problem persists
- Causes: Inner temperature sensor is defective.
- Remedy: 1) Turn the machine off then on.
2) Check the connection between the inner temp sensor and main board. If the connection is OK, replace the inner temp sensor(1404-001417) .
3) If the sensor is normal, replace the main board(JC92–02802A(M4530ND) / JC92–02801A(M4530NX)).
- Code: A3-3312, A3-3320
- Description: Sensor Failure: #A3-3312. Turn off then on. Call for service if the problem persists
The room temperature is not suitable for this set use. Please adjust room temperature - Causes: Outer temperature/humidity sensor is defective.
- Remedy: 1) Turn the machine off then on.
2) Check the connection between the outer temp sensor and main board. If the connection is OK, replace the outer temp sensor(JC32-00005A).
3) If the sensor is normal, replace the main board(JC92–02802A(M4530ND) / JC92–02801A(M4530NX)).
- Code: A4-1110
- Description: Lamp Failure: #A4-1110. Open the door, then close it. Call for service if the problem persists
- Causes: Erase Lamp does not turn on.
- Remedy: 1) Enter SVC mode. Execute the erase lamp test.
2) If the erase lamp does not turn on, replace it(JC92-02373A).
- Code: C1-1110, C1-111A
- Description: Prepare new toner cartridge
Shake toner cartridge and then install. Replace toner cartridge if the problem persists - Causes: Toner cartridge is almost empty.
- Remedy: 1) Open the front cover.
2) Remove the toner cartridge.
3) Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge.
4) Reinstall the toner cartridge.
5) Close the front cover.
6) Prepare new toner cartridge because it will be exhausted soon.
- Code: C1-1140, C1-1150, C1-1170
- Description: Replace with new toner cartridge.
End of life, Replace with new toner cartridge. - Causes: Toner cartridge is at the end of its life.
- Remedy: 1) Open the front cover.
2) Remove the toner cartridge.
3) Install the new toner cartridge.
4) Close the front cover.