Samsung ML4510ND
Error Codes List page 2
|
|
- Code: C1-1411
- Display: Toner cartridge is not installed. Install the cartridge.
- Description: The toner cartridge is not installed properly.
- Remedy: 1) Open the front cover. 2) If the toner cartridge is not installed, install it. Try to test the machine again. 3) If the toner cartridge is installed, remove it. Check if the modular jack is contaminated or broken. 4) Clean the modular jack or replace the toner cartridge. 5) If it is OK, check the CN22 harness connection on the main board. 6) If the harness is defective, replace it. 7) Turn the machine off then on. Try to test the machine.
- Code: C1-1512
- Display: Toner cartridge is not compatible. Check users guide.
- Description: Toner cartridge is not compatible.
- Remedy: Install the genuine samsung toner cartridge.
- Code: C3-1110, C3-1120, C3-1140
- Display: Prepare new imaging unit. Replace with new imaging unit. End of life, Replace with new imaging unit
- Description: The remaining life of the imaging unit is less than 10% of its life. / The remaining life of the imaging unit is less than 0% of its life.
- Remedy: Check the life remaining of the imaging unit. If its life is at the end, turn the machine off and replace the imaging unit with new one.
- Code: C3-1312
- Display: Imaging Unit Failure: #C3-1312. Install imaging unit again.
- Description: Toner sensor is defective. The machine can’t detect the sensor signal in the imaging unit normally.
- Remedy: 1) Install the genuine samsung imaging unit. 2) If the imaging unit is already installed, check the following. • Reinstall the toner cartridge and imaging unit. • Check if the CRUM connector is normal. • Turn the machine off then on.
- Code: C3-1330
- Display: Imaging Unit Failure: #C3-1330. Install imaging unit again.
- Description: The imaging unit is not installed properly.
- Remedy: 1) Open the front cover. 2) If the imaging unit is not installed, install it. Try to test the machine again. 3) If the imaging unit is installed, remove it. Check if the modular jack is contaminated or broken. 4) Clean the modular jack or replace the imaging unit. 5) If it is OK, check the CN22 harness connection on the main board. 6) If the harness is defective, replace it. 7) Turn the machine off then on. Try to test the machine.
- Code: C3-1512
- Display: Imaging unit is not compatible. Check users guide.
- Description: Imaging unit is not compatible.
- Remedy: Install the genuine samsung imaging unit.