Description: Orange light on The front cover is open.
Remedy: 1) Check for the harness connected between the Engine cover sensor and the front cover sensor. (If the harness is out, insert it to the connector.) 2) In the Engine diagnostic mode, operate the front cover sensor to see if the sensor is operating. (If it doesn t operate, replace the sensor.) 3) Check for any damages or warping to the lever. (If it is warped or damaged, replace the front cover.) 4) In the Engine diagnostic mode, operate the front cover sensor to see if No. 1 voltage of the (Close/open) Engine controller CN8 is changing from 5V to 0V. (If proper voltage is not being outputted, replace the Engine controller.
Code: 08
Display: FRONT FAN MOTOR LOCK ERROR
Description: Orange light on Occurs when the front fan doesn t operate.
Remedy: 1) Check for the harness between the exit board and the Engine controller. (If the harness is out, insert it to the connector) 2) Check for the harness between the exit board and the front fan. (If the harness is out, insert it to the connector.) 3) Operate the Engine diagnostic mode, operate the front fan to see if the fan is operating. (If it does not operate, replace the front fan) 4) Check to see if the SMPS F3 fuse is disconnected (In the case of disconnection, replace SMPS and check to see if there is a short in the 24V terminal) 5) Replace the exit board. 6) Replace the Engine controller
Code: 09
Display: HDD ERROR x
Description: Orange light on An error has occurred in the HDD. It will be displayed from HDD ERROR 0X01 to 0X40.
Remedy: Format the HDD. (Select the HDD FUNCTIONS INITIALIZE HDD from the service menu)
Code: 10
Display: HDD FULL
Description: Orange light on The HDD has exceeded its capacity.
Remedy: Delete the stored data in the HDD.
Code: 11
Display: HSYNC LSU ERROR
Description: Orange light on The HSYNC is not occurred.
Remedy: 1) Check the harness connected between the Engine controller and the LSU. (If the harness is out, insert it to the connector.) 2) In the Engine diagnostic mode, operate the LSU motor test to see if the HSYNC is created. (If the HSYNC hasn t been created, replace the LSU.) 3) Check the CN3 of the Engine controller whether it is 1.1V. (If it is not, replace the Engine controller.) 4) Replace the LSU.
Code: 12
Display: INTERNAL ERROR
Description: Orange light on A problem due to receiving data.
Remedy: 1) Turn the power off, and then on. 2) Try reprinting. 3) Inform the PC environment and the delinquent data to the [CS group appropriate Quality Control officer]