Causes: The Master loading sensor has been OFF when the master detection check at the specified angle is performed during master loading operation.
Remedy: Print drum connection signal: ON -> OFF, and Print drum set switch: ON -> OFF (Pull out the print drum to cancel the error.) -> Perform the recovery operation. * If this error occurs, print drum lock is automatically released. (Only when the print drum is at position-B.)
Code: A04 303
Description: • Master removal has failed (when the master is on the print drum).
Causes: Print drum check when a master removal error or master disposal jam occurs
Remedy: Print drum connection signal: ON -> OFF, and Print drum set switch: ON -> OFF Pull out the print drum to cancel the error. * If this error occurs, print drum lock is automatically released. (Only when the print drum is at position-B.)
Code: A05 304
Description: • Master removal has failed. • Master removal has failed (when the master is at the master removal section).
Causes: Master disposal box check when a master removal error or master disposal jam occurs
Remedy: Master disposal box set switch: OFF, and Master removal sensor: OFF (The error is canceled if the disposed master has been removed when the Master disposal box is pulled out.)
Code: A05 312
Description: • Master removal has failed. • Master removal has failed (when the master is at the master removal section).
Causes: The Master disposal jam sensor is ON at the start of the master making operation.
Remedy: Master disposal box set switch: OFF, and Master removal sensor: OFF (The error is canceled if the disposed master has been removed when the Master disposal box is pulled out.)
Code: A05 315
Description: • Master removal has failed. • Master removal has failed (when the master is at the master removal section).
Causes: The Master disposal jam sensor is ON at the end of the recovery operation.
Remedy: Master disposal box set switch: OFF, and Master removal sensor: OFF (The error is canceled if the disposed master has been removed when the Master disposal box is pulled out.)
Code: A06 403
Description: • Paper feed tray is at the upper limit position or lower limit position.
Causes: Paper feed tray set switch is OFF. * Not detected while in the low power mode (24V OFF).
Remedy: Paper feed tray upper limit set switch: ON or • Paper feed tray lower limit set switch: ON