Causes: 532 Incorrect print drum is used. 580 Incorrect print drum is used.
Remedy: Set correct print drum in the machine.
Code: D03
Description: Ink cartridge not set
Causes: 533 Bottle set switch is OFF.
Remedy: Install ink cartridge in the print drum.
Code: D04
Description: Incorrect ink cartridge
Causes: 534 Incorrect ink cartridge is used. 560 Ink RF-Tag is not detected on ink bottle. 561 Ink RF-Tag communication error (communication with the ink cartridge was interfered by noise). 562 Wrong ink cartridge information on the Ink RF-Tag. 564 Detected a mismatch in the Ink RF-Tag. 575 RF-Tag software error.
Remedy: Replace with correct ink cartridge.
Code: D05
Description: Master not set
Causes: 210 Master detection sensor is OFF (not detecting master material).
Remedy: Insert leading edge of the master material into the master entrance and close the master making unit.
Code: D07
Description: Master disposal box not set
Causes: 310 Master disposal box safety switch is OFF. (Does not detect the error during low-power mode in which 24V power is down)
Remedy: Set master disposal box in the machine.
Code: D08
Description: Master making unit not set
Causes: 224 Master making unit is not set (both the safety switch and lock sensor are OFF). 226 Master making unit safety switch is still OFF when the master making unit is set in position. 227 Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds). 228 Master making unit lock sensor is still ON even after the master making unit safety switch went OFF, when the master making unit was pulled out of the machine.
Remedy: Insert the master making unit in the machine.