PrintCopy.info service

Riso RA4900

Error Codes List page 3

  • Code: E 13
  • Description: Cutter Motor Lock
  • Causes: Displayed to interrupt the machine operation in master-making and confidential process:
    1) If master is detected by the Master positioning sensor at Drum A position after the cutting operation and besides it is still detected by the Master positioning sensor at the next Drum A position detection after the second cutting operation.
  • Remedy: Drum Set SW OFF & ON
  • Code: E 14
  • Description: Clamp Error 2
  • Causes: Displayed to interrupt the machine operation:
    1) If the actuator of the Clamp safety switch is not depressed when the Clamp solenoid is not in operation.
  • Remedy: Press ALL RESET button.
  • Code: E 15
  • Description: Flat Bed Read Pulse Motor Lock
  • Causes: Displayed to interrupt the machine operation:
    1) If the Image scanner home position sensor does not detect the Image scanner within 18898 pulses after the Flat bed read pulse motor is activated.
    2) If the Image scanner ADF Shading sensor does not detect the Image scanner within 15748 pulses after the Flat bed read pulse motor is activated.
    3) If the Image scanner is not release from the Image scanner home position sensor within 314 pulses after the Flat bed read pulse motor is activated.
    4) If the Image scanner is not released from the Image scanner ADF Shading sensor within 314 pulses after the Flat bed read pulse motor is activated.
  • Remedy: Press ALL RESET button
  • Code: E 16
  • Description: Position C Sensor Malfunction
  • Causes: Displayed to interrupt the machine operation:
    1) If the Position C sensor status has not been changed from ON to OFF (or OFF to ON) within 8 seconds from the start of the Main Motor.
  • Remedy: Press ALL RESET button.
  • Code: E 17
  • Description: Replace Battery
  • Causes: Displayed to interrupt the machine operation:
    1) If the Battery detection signal is OFF at either of following three cases. <1> when the machine power is turned ON <2> when All reset button is pressed <3> at the end of machine operation.
  • Remedy: Press ALL RESET button.
  • Code: E 18
  • Description: Sorter Error
  • Causes: Displayed to interrupt the machine operation:
    1) If an error signal is received from the sorter.
  • Remedy: Turn Power SW OFF & ON.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us