Description: Paper Jam in the Second Paper Feed Area
Causes: • If the Paper receiving sensor does not find paper when the Drum is at Position-334° and 104° the printing operation.
Remedy: Press ALL RESET button. • Remove the jammed paper.
Code: J3
Description: Paper Jam in the Paper Receiving Area
Causes: • If the status of the Paper receiving sensor does not change from detecting paper to not detecting from Drum angle 357° to 280° the printing operation.
Remedy: Press ALL RESET button. • Remove the jammed paper.
Code: J4
Description: Master Loading Error
Causes: • If the Master sensor does not detect the master (light not reflected) within 5 seconds.
Remedy: Master making unit safety SW OFF & ON.
Code: J5
Description: Master Loading Error (onto the Drum)
Causes: • If the Master sensor does not detect the master (light not reflected) during the master loading when the Drum is at 134° from the position-A.
Remedy: Master making unit safety SW OFF & ON.
Code: J6
Description: Master Cut Malfunction
Causes: • If the Master positioning sensor is still detecting the master (light reflected back) when the Drum is at position-A after the cutting.
Remedy: Master making unit safety SW OFF & ON.
Code: J7
Description: Original Jam at Entrance
Causes: • During the Original scanning, if the Original IN sensor does not detecting within 5 second after the Read pulse motor activates.