Causes: An incorrect ink cartridge is set. 332 Z03 Incompatible ink cartridge * Ink identification information (K, C, M, Y) is added after the error point. 333 Z03 Ink tag communication error on R/W PCB side (ink check) * Ink identification information (K, C, M, Y) is added after the error point. 334 Z03 Ink tag communication error on HC Control PCB side (ink check) * Ink identification information (K, C, M, Y) is added after the error point. 335 Z03 Ink tag communication error, other 1 (ink check) * Ink identification information (K, C, M, Y) is added after the error point.
Remedy: Remove the ink cartridges.
Code: Z04
Description: Ink cover not set
Causes: The ink bottle cover is open. 325 Z04 Ink bottle cover not set The ink bottle cover is detected as not set.
Remedy: Close the ink bottle cover.
Code: Z05
Description: Front cover not set (left/right)
Causes: The front cover (left/right) is open. 237 Z05 Left front cover not set The left front cover is detected as not set. 238 Z05 Right front cover not set The right front cover is detected as not set.
Remedy: Close the front cover (left/right).
Code: Z06
Description: Transfer cover (left) not set
Causes: The transfer cover (left) is open. 230 Z06 Switchback unit not set The switchback unit is not set.
Remedy: Close the transfer cover (left).
Code: Z07
Description: Transfer cover (right) not set
Causes: The transfer cover (right) is open. 229 Z07 Flipper cover not set The flipper cover is not set.
Remedy: Close the transfer cover (right).
Code: Z08
Description: Vertical transfer unit door not set
Causes: The left door of the MTPF is open. 411 Z08 Vertical transfer unit door not set The door of the FL vertical transfer unit is open.