-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Ricoh B027 Aficio 1027 R-C2
Error Codes List page 2
|
|
- Code: 195
- Description: DFGATE assert error
The DFGATE signal does not assert within 30 seconds after the original has been scanned.
- Causes: • ADF interface cable defective • SBCU board defective • Mismatched firmware between the SBCU board and ADF
- Code: 196
- Description: DFGATE negate error
The DFGATE signal does not negate within 1 minute after the DFGATE has been asserted.
- Causes: • ADF interface cable defective • SBCU board defective • Mismatched firmware between the SBCU board and ADF
- Code: 197
- Description: DFGATE error
The DFGEATE signal has already been asserted at the original scan.
- Causes: • ADF interface cable defective • SBCU board defective • Mismatched firmware between the SBCU board and ADF
- Code: 198
- Description: Memory address error
The IPU board does not receive the memory address from the controller board.
- Causes: • Mismatched firmware between the SBCU board and controller board • Controller defective • SBCU defective • IPU board defective
- Code: 199
- Description: DF scanning finish error
The original does not finish scanning with in 1 minute
- Causes: • ADF interface cable defective • SBCU board defective • Mismatched firmware between the SBCU board and ADF
- Code: 302
- Description: Charge roller current leak
A charge roller current leak signal is detected.
- Causes: • Charge roller damaged • Charge high voltage supply board defective • Poor connection of the PCU