Description: The Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (2nd Feeder Unit)
Causes:
Code: J43
Description: Paper Jam in the Registration Sensor or Paper Path Sensor.
Causes:
Code: J44
Description: Paper Jam in the Paper Exit Sensor.
Causes:
Code: J71
Description: Original was longer than 39.3 in (1m). (Information Code 031 is printed on the Transaction Journal instead.)
Causes:
Code: J72
Description: Read Point Sensor does not go ON within several seconds after the original starts feeding. (Information Code 030 is printed on the Transaction Journal instead.)
Causes:
Code: J74
Description: The Exit Sensor does not go ON within a predetermined time after the Sensor is activated.