OKI MPS4200mb
Error Codes List page 3
|
- Code: 070
- Display: Power OFF/ON
070 : Error - Description: PostScript error
Error is deteced inside the postscript core - Remedy: Error is deteced inside the postscript core Take note of the address that is displayed on LCD. Turn off and on the MFP.
- Code: 072
- Display: Power OFF/ON
072 : Error - Description: Engine interface error or PU-CU interface error
- Remedy: Is the CU/PU board installed properly?
Reinstall the CU/ PU board properly. Replace the CU/ PU board.
- Code: 073
- Display: Power OFF/ON
073 : Error - Description: Video error. An error was detected in expanding image data (an invalid data was received)
- Remedy: Is the CU/PU board installed properly? Does the error occur again?
Reinstall it properly. Change the PC to a high-specification one or decrease the resolution, and perform printing again. Replace the CU/ PU board. Replace the interface cable. Reinstall the PC printer driver.
Is the CU/PU board installed properly? Does the error occur again? Does the error depend on print data?
Reinstall it properly. Perform printing again. Print other data. Replace the CU/PU board. Ask design people to analyze the data.
- Code: 075
- Display: Power OFF/ON
075 : Error - Description: Video error. An error was detected in expanding image data.
Is the CU/PU installed properly? - Remedy: Is the CU/PU installed properly?
Reinstall it properly. Replace it.
- Code: 080
- Display: Power OFF/ON
080 : Error - Description: Parameter I/O Error
An access error occurred in a storage point of a parameter by file damage. - Remedy:
- Code: 081
- Display: Inspection is required.
081 : Error - Description: Parameter matching check error
Reading from or writing into EEPROM or flash memory cannot be made properly. - Remedy: Turn off and on the MFP. Replace the CU/PU board when the symptom persists.