OKI MC352

• Code: 057
• Description: The timeout of command communication of the scanner
  The timeout of command communication was detected between the Controller and scanner unit (A sub code indicates a cause).
  01: There is no ACK for a command to start scanning.
  02: There is no ACK for a command to cancel scanning.
  03: There is no ACK for a command to cancel SIP.
• Remedy: Record a value displayed far right at the bottom of LCD and turn off/on the power unit.

• Code: 058
• Description: An error of the scanner controlling area
  An internal error was detected in the scanner controlling area ofthe Controller.
• Remedy: Record a value displayed far right at the bottom of LCD and turn off/on the power unit.

• Code: 059
• Description: A communication error of the scanner unit
  The scanner unit detected an error after communication between the Controller and scanner unit was established.
• Remedy: Call for service to review the connection between the scanner and printer or to replace the device if the symptom persists after you turn on the power unit again.

• Code: 064
• Description: SD Card Missing Error
• Remedy: Is a SD Card installed in the unit, properly?

• Code: 067, 068
• Description: Interface monitor error
• Remedy:

• Code: 069
• Description: NIC Chip Error
• Remedy: