OKI ES2024e

• Code: 036
• Display: Service Call 036: Error
• Description: Slot2 RAM Spec Error. The CU RAM Slot2 DIMM specification is not supported.
• Causes: Is RAM DIMM genuine? Is subject RAM DIMM gap setting proper? Is error recovered by replacing subject ROM DIMM?
• Remedy: Use genuine RAM DIMM. Reset subject RAM DIMM. Replace RAM DIMM. Replace TIG board. (Replace EEPROM)

• Code: 037
• Display: Service Call 037: Error
• Description: Slot3 RAM Spec Error. The CU RAM Slot3 DIMM specification is notsupported.
• Causes: Is RAM DIMM genuine? Is subject RAM DIMM gap setting proper? Is error recovered by replacing subject ROM DIMM?
• Remedy: Use genuine RAM DIMM. Reset subject RAM DIMM. Replace RAM DIMM. Replace TIG board. (Replace EEPROM)

• Code: 040
• Display: Service Call 040: Error
• Description: CU EEPROM Error
• Causes: Is error recovered by replacing EEPROM on CU board?
• Remedy: Replace EEPROM. (Recover user environment.) Replace TIG board. (Replace EEPROM)

• Code: 041
• Display: Service Call 041: Error
• Description: CU Flash Error Flash ROM error on CU board.
• Causes: Does error display reappear?
• Remedy: Replace TIG board. (Replace EEPROM.)

• Code: 042 ... 044
• Display: Service Call 042: Error ~ 044: Error
• Description: Flash File SYSTEM Error
• Causes: Failed access to Flash set directly on CU board.
• Remedy: Press 0, 3, 5, 6 to turn power ON, release buttons when [FLASH FORMAT] appears, wait until [ON-LINE] (2sec) and replace TIG board if symptom does not change.

• Code: 048
• Display: Service Call 048: Error
• Description: CU ROM for PS+PCL was set in Non-PS device.
• Causes: Is proper program ROM set?
• Remedy: Replace program ROM DIMM. Replace with proper program ROM DIMM.