Description: Autocomp Motor Error Tray 1 motor has failed.
Remedy: 1 Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. Check the cable in connector JFDPCK1 (A) for proper connection to the system board, the cable for pinch points, and the cable or connector for any other damage. Is the cable damaged? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Go to step 2. 2 Measure the resistance across fuse F13 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Go to step 3. 3 1. Disconnect the cable in the connector JFDPCK1. 2. Connect the cable for the new paper pick mechanism. 3. Select PRINT TESTS, and press Select ( ). 4. Select Tray 1 and press Select ( ). 5. Select Single, and press Select ( ). Does the new pick motor turn before the feed error occurred? Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. Replace the system board. See “System board removal”.
Code: 142.09...142.27
Description: Motor Error Fuser motor has failed.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cables in connectors JCARTP1 (A) and JCARTS1 (B) (cartridge motor 1/ fuser motor cable) for proper connection to the system board, for cable pinch points, and for any other damage to the cable or connectors. Is either cable damaged? Replace the cartridge motor1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”. Go to step 2. 2 Remove the right cover. See “Right cover removal”. Check the cartridge motor 1/fuser motor cable for proper connection to the EP drive assembly (A), for pinch points for the cable, and for cable or connector damage. Is either cable damaged? Replace the cartridge motor 1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”. Go to step 3. 3 Measure the resistance across fuse F6 (A) on the system board. Is the fuser blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”.
Code: 143.09...143.27
Description: Motor Error EP Drive assembly cartridge 1 (top) motor has failed.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cable in connector JCARTP1 (A) and JCARTS1 (B) (cartridge motor 1/ fuser motor cable) for proper connection to the system board, for the cable for pinch points, and for the cable or connector for any other damage. Is the cable damaged? Replace the cartridge motor 1/fuser cable. See “Cartridge motor 1/fuser cable removal”. Go to step 2. 2 Remove the right cover. See “Right cover removal”. Check the cartridge motor 1/fuser motor cable (A0 for proper connection to the EP drive assembly, for pinch points for the cable, or damage to the cable or connector. Is either cable damaged? Replace the cartridge motor 1/fuser motor cable. See “Cartridge motor 1/ fuser cable removal”. Go to step 3. 3 Measure the resistance across fuse F7 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”.
Code: 144.09...144.27
Description: Motor Error EP Drive assembly cartridge 2 (middle) motor has failed.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cables in connector JCARTP2 and JCARTS2 (A) (cartridge motor 2/3 cable) for proper connection to the system board, for cable pinch points, and for any other damage to the cable or connector. Is the cable damaged? Replace cartridge motor 2/ 3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 2. 2 Remove the right cover. See “Right cover removal”. Check the cartridge motor 2/3 cable for proper connection to the EP drive assembly, pinch points for the cable, or damage to the cable or connector (A). Is either cable damaged? Replace the cartridge motor 2/3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 3. 3 Measure the resistance across fuse F9 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”.
Code: 145.09...145.27
Description: Motor Error EP drive assembly cartridge 3 (bottom) motor has failed.
Remedy: 1 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cables in connector JCARTP2 (A) and JCARTS2 (B) (cartridge motor 2/3 cable) for proper connection to the system board, for cable pinch points, and for any other damage to the cable or connector. Is the cable damaged? Replace cartridge motor 2/ 3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 2. 2 Remove the right cover. Check the cartridge motor 2/3 cable for proper connection to the EP drive assembly, pinch points for the cable, and damage to the cable or connector (A). Is either cable damaged? Replace the cartridge motor 2/3 cable. See “Cartridge motor 2/3 cable removal”. Go to step 3. 3 Measure the resistance across fuse F10 on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the EP drive assembly. See “Electrophotographic (EP) drive assembly removal”.
Code: 146.01...146.08
Description: Motor Error Duplex motor has failed.
Remedy: 1 Is the front door assembly damaged? Replace the front door assembly. See “Front door assembly removal”. Go to step 2. 2 Is the multipurpose feeder damaged? Replace input tray. Go to step 3. 3 1. Turn the printer off. 2. Remove the rear frame cover. See “Rear frame cover removal”. 3. Check the cable in connector JDX1 (A) (MP feeder/duplex motor cable) for proper connection to the system board, the cable for pinch points, and the cable or connector for any other damage. Is the cable damag4 Remove the right cover. See “Right cover removal”. Check the MP feeder/duplex motor cable for proper connection to the MPF/duplex motor, pinch points for the cable, and damage to the cable or connector. Is either cable damaged? Replace the MPF/duplex motor cable. See “Multipurpose feeder (MPF)/duplex motor cable removal”. Go to step 5.ed? Replace the MPF/duplex motor cable. See “Multipurpose feeder (MPF)/duplex motor cable removal”. Go to step 4. 5 Check the MPF/duplex gear assembly for damage. Do the gears turn freely, and are they free of damage? Go to step 6. Replace the MPF/duplex gear assembly. See “Multipurpose feeder (MPF)/duplex gear and housing removal”. 6 Measure the resistance across fuse F5 (A) on the system board. Is the fuse blown? Replace the system board. See “System board removal”. Replace the MPF/duplex motor. See “Multipurpose feeder (MPF)/duplex motor assembly removal”.