Description: While in the paper feed, there occurs a condition twice in succession in which the lift sensor (PS23) does not turn ON within a specified period of time after the pick-up solenoid /BP (SD1) turns ON. While in the power switch (SW2) ON, there occurs a condition twice in succession in which PS23 does not turn OFF within a specified period of time after SD1 turns ON.
Causes: Pick-up solenoid /BP (SD1) Lift sensor (PS23) Feed motor (M9) Printer control board (PRCB)
Code: C-0301
Description: Fan abnormality
- Conveyance suction fan (FM5) abnormality.
Causes: Conveyance suction fan (FM5) Printer control board (PRCB)
Code: C-1001
Description: Communication abnormality
- Communication abnormality between the engine control of the overall control board (OACB) and that of the printer control board (PRCB). While in the stand-by, an FS Ready signal cannot be detected for a specified period of time.
Causes: Overall control board (OACB) Printer control board (PRCB)
Code: C-1002
Description: FS
- FS communication abnormality. A serial communication is unavailable between the FS control board (FSCB) and the printer control board (PRCB).
Causes: FS control board (FSCB) Printer control board (PRCB)
Code: C-1003
Description: FS-522
- Flash ROM abnormality. A checksum error of the flash ROM is detected.
Causes: FS control board (FSCB)
Code: C-1101
Description: FS-523 Shift motor (M8) drive abnormality.
- When starting the home position movement, the shift home sensor (PS10) does not turn ON a specified period of time after M8 turns ON.
- When starting the shift position movement, PS10 does not turn OFF a specified period of time after M8 turns ON.
Causes: Shift motor (M8) Shift home sensor (PS10) FS control board (FSCB)