Description: Someone pressed <Stop> during fax reception.
Remedy:
Code: R.2.3
Description: Poor phone line conditions made fax communication impossible. Enable the one second pause after CED on Memory Switch 20. Also try increasing the echo wait time on Memory Switch 21 if echo is on the line
Remedy:
Code: R.3.1
Description: No response to CFR. DCN was received from the transmitter. Poor line conditions made communication impossible. Adjust the echo wait time on Memory Switch 21. Try increasing the output levels via Memory Switch 11.
Remedy:
Code: R.3.3
Description: Too many errors were detected during data reception. The carrier was interrupted. Increase the data error rate on Memory Switch 20.
Remedy:
Code: R.3.4
Description: DCN was received after FTT. Communication was not possible at 2400 bps. Poor phone line conditions prevented fax communication. Enable the Eye Quality Check on memory Switch 31 and 32.
Remedy:
Code: R.4.1
Description: The machine received too large length data that over your machine’s limit.