Remedy: The I/O configuration for the computer or printer is incorrect.
– Refer to the service manual for the proper configuration. The I/O Cable is wrong or damaged.
– Replace the I/O cable with the specified (IEEE-1284) cable.
The printer I/O port is damaged.
– Replace the I/O PCA or formatter PCA.
Code: 08
Image:
Description: Error 40
Remedy: The computer and printer may be set to different baud rates.
– Refer to the service manual to reset the baud rates.
The computer is turned off.
– Turn the computer on.
The MIO card is unseated or defective.
– Remove, reseat, or replace the MIO card.
An abnormal connection break occurred while transferring data from the computer.
Code: 09
Image:
Description: Error 41.1
Remedy: There are defective connections.
– Reseat J205, J206, J207, and laser scanner connections. There is a paper multifeed or the wrong size of paper is being used.
The paper size selection does not match the installed paper.
One of the cassettes is overfilled or improperly adjusted.
– Remove the paper from the cassette. Readjust the cassette. The paper does not meet HP specifications.
Code: 10
Image:
Description: Error 41.2
Remedy: There are defective connections.
– Reseat J205, J206, J207, and laser scanner connections. There is a paper multifeed or the wrong size of paper is being used.
The paper size selection does not match the installed paper.
One of the cassettes is overfilled or improperly adjusted.
– Remove the paper from the cassette. Readjust the cassette. The paper does not meet HP specifications.
Code: 11
Image:
Description: Error 41.3
Remedy: There are defective connections.
– Reseat J205, J206, J207, and laser scanner connections. There is a paper multifeed or the wrong size of paper is being used.
The paper size selection does not match the installed paper.
One of the cassettes is overfilled or improperly adjusted.
– Remove the paper from the cassette. Readjust the cassette. The paper does not meet HP specifications.
Code: 12
Image:
Description: Error 68
Remedy: (68 SERVICE) -NVRAM full.
– Perform a nonvolatile random-access memory (NVRAM) initialization by holding down [Reset] for more than 20 seconds while turning on the printer. The formatter PCA is defective.
