HP LaserJet 5P

• Code: 13
• Image:
• Description: Error 68.1
• Remedy: (68 SERVICE) -NVRAM full.
  – Perform a nonvolatile random-access memory (NVRAM) initialization by holding down [Reset] for more than 20 seconds while turning on the printer. The formatter PCA is defective.

• Code: 14
• Image:
• Description: Error 51
  (beam detect)
• Remedy: A temporary error has occurred.
  – Power cycle the printer.
  The laser scanner assembly is not seated. The laser scanner assembly is defective.
  – Replace the laser scanner assembly.

• Code: 15
• Image:
• Description: Error 52
  (scanner malfunction)
• Remedy: A temporary error has occurred.
  – Power cycle the printer.
  The scanning assembly is improperly fitted.
  A problem has occurred with the scanner cable.
  The laser scanner assembly is defective.
  The DC controller PCA is defective.

• Code: 16
• Image:
• Description: Error 55
• Remedy: The cable is loose or bad.
  The DC controller PCA is defective.
  – Replace the DC controller PCA
  The formatter PCA is defective.
  The paper input PCA is defective.
  The main motor is defective.
  There is inadequate site power (or the problem may be the result of thunderstorms). Examine the surge protector.
  – Replace the DC controller PCA and/or the formatter PCA if necessary.

• Code: 17
• Image:
• Description: Error 53-0
  ROM error
• Remedy: Remove all SIMMs and power cycle the printer. Retry the operation. Replace the SIMMs one at a time to locate the defective module. Refer to the Service Manual for details.

• Code: 18
• Image:
• Description: Error 53-1
  RAM error
• Remedy: Remove all SIMMs and power cycle the printer. Retry the operation. Replace the SIMMs one at a time to locate the defective module. Refer to the Service Manual for details.