Description: Excess friction in pen capping assembly
Remedy: Check mechanical parts in pen capping assembly for binding.
Code: 04xxxx
Description: MIO interface error.
Remedy: If an MIO is installed, check the MIO setup. Then replace the MIO.
Code: 05xxxx
Description: Plotter system errors found.
Remedy: MIO problem is indicated. The most likely cause is the main PCA or the interconnect PCA. Replace the interconnect PCA. Replace the main PCA.
Code: 060111
Description: Line sensor LED not bright enough.
Remedy: The optical sensor on the carriage has failed to locate lines drawn during the pen calibration routine. Reduce the ambient light. If the media is not clean and reflective, change the media. If the lines are faint, replace the pens. Clean lenses. Replace LED. Use the Edge detect test, found in the service menu, to help troubleshoot.