PrintCopy.info service

Epson Stylus Pro 7900

Error Codes List page 5

  • Code: 141E
  • Description: Velocity deviation error
    Detects that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Encoder failure • Motor driver failure • Motor failure
  • Remedy: Replace the Ink System Unit. Replace the Main Board Assy.
  • Code: 141F
  • Description: Lock error
    Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
  • Remedy: Check the connection between the Ink System Unit and the Main Board Assy. Replace the Ink System Unit.
  • Code: 1427
  • Description: CSIC destination setting error
    An Ink Cartridge for a wrong destination has been installed. The Ink Holder is not adjusted correctly.
  • Remedy: Replace the Ink Cartridge with a correct one for this printer. Start the printer in the Serviceman Mode without setting the ink cartridge, and then execute “Ink Holder Adjustment” from the Service Program.
  • Code: 1428
  • Description: Ink Holder adjustment error
    The adjustment statuses of the Ink Holder on the left and on the right are not the same. This service call error does not occur for Epson Stylus Pro 7700/7710 /9700/9710.
  • Remedy: 1. While opening the cover of the Ink Holder (to avoid a service call error from occurring), start the printer in the Serviceman Mode. 2. Execute “Ink Holder Adjustment” from the Service Program.
  • Code: 1430
  • Description: Holder ink pad error
    The number of replacement counter of the ink cartridges has reached the specified life. (the life of the waste ink pad attached to the ink cartridge holder)
  • Remedy: Check if the waste ink pads attached to the ink cartridge holder are contaminated. If it has already absorbed a considerable amount of ink, exchange the ink cartridge holder (L and R), and clear the counter using the Service Program.
  • Code: 1431
  • Description: Ink selector life error
    The number of operation counter of the Ink Selector has reached the specified life.
  • Remedy: Replace the Ink Selector, and clear the counter using the Service Program.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us