Remedy: 1. Install the Ink Cartridge properly. 2. Replace the Ink Cartridge with a new one. 1. Connect the Head FFC to connector on the CSIC Board. 2. Replace the CSIC Board with a new one. 1. Replace the CSIC Board with a new one.
Code: 08
Display: Cannot recognize ink cartridges.
Description: Incorrect ink cartridge
Causes: Incorrect I/C is set.
Remedy: 1. Install the Ink Cartridge properly. 2. Replace the Ink Cartridge with a new one. 1. Connect the Head FFC to connector on the CSIC Board. 2. Replace the CSIC Board with a new one. 1. Replace the CSIC Board with a new one.
Code: 09
Display: Ink cartridge cover is open. Open the scanner unit and close the ink cartridge cover.
Description: Ink cartridge cover open error
Causes: Ink replacement was attempted with the Ink Cartridge Cover open.
Remedy: 1. Close the Ink Cartridge Cover.
Code: 10
Display: Paper out. Load paper and press the Start button.
Description: Paper out error
Causes: Failure to load paper to print.
Remedy: 1. Set a cleaning sheet in the ASF Unit up side down. Then holding the top edge, try to load the paper from the Printer driver. The micro pearl on the LD Roller surface is removed. To remove severe smear, staple a cloth moistened with alcohol to a post card and clean the roller in the same manner. *If the problem is not solved, replace the ASF unit with new one. 1. Reassemble the Compression Spring 1.94 between the Base Frame and the Hopper.
Code: 11
Display: Replace ink cartridge before cleaning print head.
Description: Head cleaning (Ink low error)
Causes: Head cleaning was attempted in the Ink low status.
Remedy: 1. Replace the Ink Cartridge with a new one.
Code: 12
Display: Cannot recognize the device.
Description: DSC Direct error
Causes: A device not supported is connected to the port for the connection of external memory devices. The DSC demands the current larger than mechanical limit
Remedy: 1. Replace the USB Cable with a new one. 2. Replace the digital camera with a compatible one