Causes: After lift-up of the Lifting Plate of the Cassette 1 started, ON status of the Paper Surface Sensor of the Cassette 1 was not detected within the specified period of time.
Remedy: 1. Turn ON the power with the cassette of the Cassette Unit removed, insert the cassette, and then check the operation sound of the Lifter Motor. When there is operation sound of the Lifter Motor, check if the Lifting Plate has been lifted up. <When the Lifting Plate has been lifted up> 1. Check the harness/connector connection between the Cassette Driver PCB and the Paper Surface Sensor of the Cassette Unit. 2. Check the harness/connector connection between the Cassette Driver PCB and the Cassette Pickup Solenoid of the Cassette Unit. 3. Replace the Cassette Driver PCB. 4. Replace the DC Controller PCB. <When the Lifting Plate has not been lifted up> 1. Check the condition of the gear of the Cassette Unit (missing teeth, swing). 2. Replace the Drive Unit of the Cassette Unit. <When there is no operation sound of the motor> 1. Check the harness/connector connection between the Cassette Driver PCB and the Lifter Motor of the Cassette Unit. 2. Replace the Drive Unit of the Cassette Unit. 3. Replace the Cassette Driver PCB. 4. Replace the DC Controller PCB 4. Replace the DC Controller.
Code: E052-0000
Description: Duplex Feed Unit absent error
Causes: Connection of the Duplex Feed Unit was not correct.
Remedy: 1. Replace the DC Controller PCB.
Code: E066-0000
Description: Environment Sensor error
Causes: When the Environment Sensor is judged to be in error
Remedy: 1. Check the harness/connector connection between the Power supply switch PCB (Environment Sensor) and the DC Controller PCB. 2. Replace the Power supply switch PCB (Environment Sensor). 3. Replace the DC Controller PCB.
Code: E100-0000
Description: BD error
Causes: BD error
Remedy: 1. Check the harness, Flat Cable, and connector connection between the Laser Scanner Unit and the DC Controller PCB. 2. Replace the Flat Cable. 3. Replace the Laser Scanner Unit. 4. Replace the DC Controller PCB.
Code: E110-0000
Description: Error in startup of the Scanner Motor
Causes: Scanner area error (error in the initial operation of the Scanner Motor)
Remedy: 1. Check the harness/connector connection between the DC Controller PCB and the Laser Scanner Unit. 2. Check the harness/connector connection between the Relay PCB and the Laser Scanner Unit. 3. Replace the Laser Scanner Unit.
Code: E110-0001
Description: Scanner Motor rotation error
Causes: Scanner area error (Scanner Motor rotation error)
Remedy: 1. Check the harness/connector connection between the DC Controller PCB and the Laser Scanner Unit. 2. Check the harness/connector connection between the Relay PCB and the Laser Scanner Unit. 3. Replace the Laser Scanner Unit.