PrintCopy.info service

Canon iRC1028iF

Error Codes List page 3

  • Code: E012-0006
  • Description: Error in activation of motor C
    Description When 2.5 sec passed after activation of the cyan drum motor, the cycle of the drum motor speed detection signal does not become its specified value.
  • Causes: Error in drum motor, error in DC controller PCB.
  • Remedy: - Replacement of drum motor - Replacement of DC controller PCB
  • Code: E012-0007
  • Description: Error in activation of motor C
    After the cyan drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.
  • Causes: Error in drum motor, error in DC controller PCB.
  • Remedy: - Replacement of drum motor - Replacement of DC controller PCB
  • Code: E012-0008
  • Description: Error in activation of motor Bk
    When 2.5 sec passed after activation of the black drum motor, the cycle of the drum motor speed detection signal does not become its specified value.
  • Causes: Error in drum motor, error in DC controller PCB.
  • Remedy: - Replacement of drum motor - Replacement of DC controller PCB
  • Code: E012-0009
  • Description: Error in activation of motor Bk
    After the black drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.
  • Causes: Error in drum motor, error in DC controller PCB.
  • Remedy: - Replacement of drum motor - Replacement of DC controller PCB
  • Code: E014-0000
  • Description: Error in activation of fixing motor
    When 2.5 sec passed after activation of fixing motor, the cycle of the fixing motor speed detection signal does not become its specified value.or more.
  • Causes: Error in fixing motor, error in DC controller PCB.
  • Remedy: - Replacement of fixing motor - Replacement of DC controller PCB
  • Code: E014-0001
  • Description: Error in activation of fixing motor
    After the fixing motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.ore.
  • Causes: Error in fixing motor, error in DC controller PCB.
  • Remedy: - Replacement of fixing motor - Replacement of DC controller PCB
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us